AUTOCAD PRO bricscad pro ULTIMATE
Orientation | Workplane | 2 Points
Command Line
AutoCAD / BricsCAD: CWWORKPLANE | 2POINTS
This command sets the orientation of the X-axis of the UCS from two user-defined picks on the point cloud while keeping the Z-axis upright.

Using the Tool
To orientate the UCS from two selected points, follow the steps below:
Activate the tool using any option below:
Select 2 Points from the Workplane menu in the Orientation panel.
Type a command line prompt specific to the preferred CAD system and press ENTER.
When prompted to Pick origin, select a point on the point cloud to define the origin.
When prompted to Pick X axis, select a point on the point cloud to define the X-axis direction.
This will not change the orientation or direction of the Z-axis. It will remain in the up direction.
The Y-axis will rotate to match the user-defined pick points and the UCS will be aligned.