System hardware requirements
The following table outlines the hardware requirements to run TruView on your computer. It may run using lower than recommended hardware but performance might not be optimal.
Windows 8.1 or later, Windows 10
Intel Core i5-4590/AMD FX 8350 equivalent or better
NVIDIA GeForce GTX 970, AMD Radeon R9 290 equivalent or better
NVIDIA GeForce GTX 1060, AMD Radeon RX 480 equivalent or better
1x USB 2.0 or newer, HDMI 1.4, Display Port 1.2 or newer
If you are using a headset that supports the Windows Mixed Reality, you can verify if your PC will support TruView VR via the Windows Mixed Reality Portal.
After you have setup your headset, launch the Windows Mixed Reality Portal.
After running the app, you'll get one of the following messages:
You're good to go. Your PC is ready to run mixed reality games and experiences.
Supports some features. Your PC can run some mixed reality experiences.
Can't run mixed reality. This PC doesn't meet the minimum requirements needed to run Windows Mixed Reality.
You'll then get an analysis of your PC against the required hardware, drivers, and operating system.
Supported VR Headsets
TruView VR will support most modern Windows Mixed Reality headsets, however it has only been tested on some headsets. If you are using an untested headset you will likely have map the buttons manually through the steam app. The following document outlines the steps required to add custom controller bindings to VR controller.
Supported and tested Headsets
HP Reverb G2
Meta Quest 2
Setting up VR Headsets
The setup process will vary depending on which headset you are using. Please reference the appropriate online documentation for setting up the VR headset you are using. Ensure that when you are setting up your headset that you connect the headset to your dedicated graphics card and not the one that is integrated with your CPU.