---
title: "Launch Cyclone ENTERPRISE"
slug: "cyclone-enterprise-launch-cyclone-enterprise"
updated: 2026-09-04T16:00:41Z
published: 2026-09-04T16:00:41Z
canonical: "rcdocs.leica-geosystems.com/cyclone-enterprise-launch-cyclone-enterprise"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Launch Cyclone ENTERPRISE

Cyclone ENTERPRISE can be opened using any supported web browser.

> [!NOTE]
> Note: See the list of supported browsers in the [Software Requirements](https://demo.cyclone-enterprise.com/help/en/adminhelp/01_Introduction/0102_Server_Machine_Requirements.htm) section.

The default address and port for Cyclone ENTERPRISE are as the following:

- Address: IP Address
- Port: 5050

To access the address, type [http://localhost:5050/](http://localhost:5050/) in the browser.

![image165.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image165.png)

> [!NOTE]
> Note: The above is for accessing Cyclone ENTERPRISE on the machine on which it is installed. If you are accessing Cyclone ENTERPRISE from another machine on the same network, replace "localhost" with the IP address of the Windows machine Cyclone ENTERPRISE is installed on (e.g., [http://192.0.0.0:5050](http://192.0.0.0:5050/)).

> [!NOTE]
> Note: If you have modified the port number (see section [Post-Installation System & Network Configurations](https://demo.cyclone-enterprise.com/help/en/adminhelp/02_Deployment/0205_Post-Installation_System_&_Network_Configurations.htm) for information on how to do this), replace "5050" with the correct port number.

> [!NOTE]
> Note: If you have configured Cyclone ENTERPRISE for access over the Internet, type in the URL path with no port number (see [Advanced Post-Installation Configurations: LAN/Corporate WAN](https://demo.cyclone-enterprise.com/help/en/adminhelp/02_Deployment/0206_Advanced_Post-Installation_Configurations__Port_Forwarding_&_HTTPS_Setup.htm) for more information on how to do this).