--- title: "Basic Tutorial | Extract Features From a Point Cloud" slug: "cyclone-3dr-exercise-extract-features-from-a-point-cloud" updated: 2026-09-07T11:51:46Z published: 2026-09-07T11:51:46Z canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-exercise-extract-features-from-a-point-cloud" --- > ## Documentation Index > Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt > Use this file to discover all available pages before exploring further. # Basic Tutorial | Extract Features From a Point Cloud Unlike the best feature computation commands which use all points of an object, the commands to extract features try to find the best feature from a seed of point(s). > [!TIP] > Open the file **AlignOnRef.3dr** ([download](https://www.cyclone3dr.com/download_helper.php?File=Cyclone3DRSampleData/AlignOnRef.3dr)). **Circle** To extract the dimensions of a hole in this mechanical part, launch [Region Grow Circle](/v1/docs/cyclone-3dr-regiongrowcirclec). Set the **Extraction tolerance** to 0.5 mm and click a point close to the border of the hole (the point has to be given on the planar side). ![image-20250627-142250.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20250627-142250.png) Extract Circle - Region Grow - You can set some parameters (Center, Normal, Radius). The distance between the extracted feature and the original points is visualized using the color gradient. - You can generate a measure or the extracted points if you wish by checking the corresponding options**.** - Click **OK, Next** to validate the circle or **OK, Exit** to validate and exit the command. - You can use the region grow for all geometric features (except cones) ![image-20250627-144612.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20250627-144612.png) Circle, cylinder and plane extracted from the cloud