Coord Sys
- 2 Sub categories
- 13 Articles
This command allows to create a local coordinate system. It is a similar dialog box to the command Geometric Registration , , but here no object is moving. The command allows also editing the position and the aspect of any coordinate system ....
- 7 Articles
Floor+Wall Wall+Wall Wall On Slice 2 Points Change Origin Corner All those commands allow creating or modifying a UCS in an iterative way using the following principle: Starting from any Coordinate System, the...
This command translates selected objects with a vector. During this operation, the objects can be copied once or more. Requirements Select the object(s) to be translated and launch the command. Enter a direction for the translation. ...
This command rotates selected objects by an angle around an axis. During this operation, the object can be copied once or more. Requirements Select the object(s) to be rotated and launch the command. Click the Axis position button t...
This command displays a "Manipulator" in order to move / rotate / scale your selection manually and efficiently with the mouse. Requirements Select the object(s) you want to move and launch the command. When you enter the command, each co...
This command makes a mirror image of the selected objects. With this command you can do a: Central symmetry Axial symmetry Planar symmetry Requirements Select the object(s) to be mirrored and launch the command. Choose the sy...
This command makes an offset of the selected polylines, meshes or geometric shapes. The behavior and the content of the command differ depending on the type of objects. Requirements Select the object(s) and launch the command. All objects must...
This command scales the selected objects. Select the objects to scale and launch the command. Define the Scale center (the point which will not move). Choose the type of scaling: Different scale for X, Y and Z to set a different ...
This command registers a cloud and a model (usually a BIM object). Requirements Select the cloud (3DR native or LGSx) and the BIM, CAD or mesh object to align and launch the command. The view is split in two: the cloud to the l...
This command moves the selected object using a coordinate system, which is fitted on the current coordinate system. The departure coordinate system to move is defined by geometrical elements (point(s), line(s), and plane(s), just like the command...
This command aligns the selected objects using N pairs of points (called mobile and fixed points) and computes the transformation that minimizes the distance between each mobile point and the corresponding fixed in a least squares sense. Requir...
- 2 Articles
This command aligns the selected objects using 1, 2 or 3 pairs of points (called mobile and fixed points): Point alignment giving 1 pair of points. This is equivalent to a translation from the first point to the second point. Linear alignm...
This command sets: The Document Unit , that is to say the unit of the current document. The new unit will be applied to the document but the data won't be changed. The Default Document Unit , that is to say the unit of next new d...
This command allows you to repair the unit of your document. It will rescale your data according to the new unit. Requirements No selection is required to launch the command. Choose the New unit to apply to your document. Notes...