---
title: "Sync Toggles"
slug: "cloudworx-sync-toggles"
updated: 2026-09-07T16:33:36Z
published: 2026-09-07T16:33:36Z
canonical: "rcdocs.leica-geosystems.com/cloudworx-sync-toggles"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Sync Toggles

**autocad pro** **revit** **navisworks** **bricscad pro** **ultimate**

## **TruSpace | Sync Toggles**

### **Command Line**

- **AutoCAD / BricsCAD: CWTSTOOL**

This command opens a dialog with synchronisation settings. It also appears automatically when opening TruSpace or KeyPlan.

![image-20240402-122255.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20240402-122255.png)

> [!NOTE]
> **Note:** Do not close the dialog unless you want to disable TruSpace synchronisation, where the CAD viewpoint changes to match the TruSpace viewpoint.

### **Using the Tool**

When the tool is activated, the **TruSpace Toggles** dialog appears with the following settings:

![image-20240402-123244.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20240402-123244.png)

- **Enable Sync**: This is a toggle item that enables or disables the viewpoint synchronisation with the TruSpace viewer. When synchronisation is off, the CAD viewpoint does not update to match the TruSpace viewpoint.
- **3D Point**: When enabled, CloudWorx submits the 3D pick from the TruSpace viewer to the CAD command line. This pick can be used by CAD commands that accept 3D coordinates. Use **Pick on Cloud** for CloudWorx commands.
- **Pick on Cloud**: When enabled, CloudWorx recomputes the pick made in the TruSpace viewer based on the closest cloud points visible in the CAD window. Recomputation may fail if there are not enough points near the pick or when the points are clipped or hidden in CloudWorx. Use **3D Point** for non-CloudWorx commands.
- **View Point**: When enabled, the viewpoint of the active CAD viewport automatically updates to match the TruSpace viewpoint. When needed, use the [Regenerate Points](/v1/docs/cloudworx-regenerate-points) command to load more details.