---
title: "QuickSlice"
slug: "cloudworx-quickslice"
updated: 2026-09-07T14:41:01Z
published: 2026-09-07T14:41:41Z
canonical: "rcdocs.leica-geosystems.com/cloudworx-quickslice"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# QuickSlice

**AUTOCAD PRO** **REVIT** **bricscad pro** **ULTIMATE**

## **Line-Tools | QuickSlice**

### **Command Line**

- **AutoCAD / BricsCAD: CWQSLICE**

CloudWorx includes a set of tools designed to set up a slice, place the Workplane (also UCS) on the slice's mid-plane, and then align the view to the slice. These tools are intended to prepare for [Polyline Tools](/v1/docs/cloudworx-polyline-tools).

![image-20240321-164155.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20240321-164155.png)

The **QuickSlice** tool includes the following options to create a slice:

- [**Floor+Wall**](/v1/docs/cloudworx-quickslice-floor-wall):It is used to define a vertical slice as a Workplane by picking both floor and wall points.
- [**Wall+Wall**](/v1/docs/cloudworx-quickslice-wall-wall): It is used to define a horizontal slice as a Workplane by picking two wall points.
- [**Wall**](/v1/docs/cloudworx-quickslice-wall): It is used to define a horizontal slice as a Workplane by picking a wall point.
- [**Origin**](/v1/docs/cloudworx-quickslice-origin): It is used to create a quick slice on the X and Y planes of the current UCS.
- [**Thickness**](/v1/docs/cloudworx-quickslice-thickness): It is used to change the slice thickness.