---
title: "QuickSlice Wall+Wall"
slug: "cloudworx-quickslice-wall-wall"
updated: 2026-09-07T16:05:01Z
published: 2026-09-07T16:05:01Z
canonical: "rcdocs.leica-geosystems.com/cloudworx-quickslice-wall-wall"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# QuickSlice Wall+Wall

**AUTOCAD PRO** **REVIT** **bricscad pro** **ULTIMATE**

## **Line-Tools | QuickSlice Wall+Wall**

### **Command Line**

- **AutoCAD / BricsCAD: CWQSLICE | WW**

This tool enables the creation of a horizontal slice from two pick points at the corner of two walls.

When the Wall+Wall QuickSlice method is chosen, a QuickSlice will be created with a UCS where the X-axis aligns with the first wall, the Y-axis aligns with the second wall, and the origin is located at the hinge projected from the first pick.

![image-20240425-124622.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20240425-124622.png)

---

### **Using the Tool**

To create a horizontal slice based on two points selected on two different walls, follow the steps below:

1. Activate the tool using any option below:
  1. Select **QuickSliceWall+Wall** in the **Line-Tools** panel.
  2. Type a [command line prompt](/v1/docs/cloudworx-quickslice-wall-wall#command-line) specific to the preferred CAD system and press **ENTER**.
2. When prompted to **Pick 1st wall point**, select a point on the point cloud to define the first wall.
3. When prompted to **Pick 2nd wall point**, select a point on the point cloud to define the second wall.

The QuickSlice is created and saved to the [Clipping Manager](/v1/docs/cloudworx-clipping-manager). However, if the QuickSlice tool is used again, it will overwrite this clip. To save the clip for future use, rename it in the Clipping Manager.