Skip to main content
Skip table of contents

RCS Visualization Modes

Visualization modes can be used to quickly change which objects within an asset are visible in the scene and how they are displayed.

image-20240429-204945.png
RCS_Visualization_PC.jpg

Point Cloud

Click the Point Cloud button to view only the point cloud. This setting will override the Mesh or Comparison modes.

image-20240429-204148.png

Point Cloud Only

image-20240314-203640.png

Mesh

Click the Mesh button to view only the mesh. This setting will override the Point Cloud or Comparison modes.

A mesh may not be available for the asset. Please refer to the mesh creation article for more information.

If the asset contains a mesh, this will be the default mode.

image-20240429-203842.png

Mesh Only

image-20240314-204154.png

Dollhouse

Click the Dollhouse button to view the mesh with top removed (e.g. building ceiling or roof)

This mode can be especially helpful for multi-story buildings or those where both the interior and exterior were scanned and a standard mesh view would cause the exterior roof to obscure the interior of the building.

This setting can be combined with any other visualization mode.

If the asset has no mesh, Dollhouse mode cannot be activated.

RCS__DH_Mesh_Off.jpg

Dollhouse off

RCS__DH_Mesh_On.jpg

Dollhouse on

image-20240314-204646.png
image-20240429-205114.png

Panoramic viewpoints

Click the Ellipses button access the Panoramic viewpoints setting. Toggle the viewpoints on and off.

This setting can be combined with any other visualization mode.

Panoramic viewpoints will only be available to toggle if panoramic images were processed for the asset.

image-20240430-130052.png

Visible Panoramic viewpoints

image-20240314-204646.png
image-20240429-205114.png

Comparison mode

Click the Ellipses button to activate Comparison mode view the point cloud and mesh together.

This setting will override point cloud or mesh alone.

image-20240429-203617.png

PC and Mesh

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.