Breadcrumbs

Workplane - Wall

Function

This command fits a temporary patch to the point cloud from a user defined wall and orientates the UCS to fit while changing the Z-Axis.

Procedure

To orientate the UCS to a Wall:

  1. Click on the icon or type Cwworkplane at the CAD command line and press Enter

  2. Type Wall at the CAD command line and press Enter

  3. The user will be prompted to Pick wall point

    1. Be sure Node OSNAP is on

    2. Pick on the point cloud to define the wall

  4. The UCS will now be aligned to the Wall that was defined