---
title: "Workplane - 2 Points"
slug: "map360-workplane-2-points"
updated: 2026-09-04T15:26:10Z
published: 2026-09-04T15:26:10Z
canonical: "rcdocs.leica-geosystems.com/map360-workplane-2-points"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Workplane - 2 Points

## Function

This command sets the orientation of the X-Axis of the UCS from 2 user defined picks on the point cloud while keeping the Z-Axis in the up direction.

## Procedure

To orientate the UCS from 2 Pick Points:

1. Click on the icon or type **cwworkplane** at the CAD command line and press **Enter**
2. Type **2P**oints at the CAD command line and press **Enter**
3. The user will be prompted to **Pick origin**
  1. Be sure **Node OSNAP** is on
  2. Pick on the point cloud to define the origin
4. Next the user will be prompted to **Pick X axis**
  1. Pick on the point cloud to define the X axis directions.
  2. This will not change the orientation or direction of the Z axis. The Z axis will remain in the up direction.
5. The Y axis will rotate to match the user defined pick points and the UCS will now be aligned.