--- title: "Firmware v1.3.5 | Leica RTC Series" slug: "leica-rtc-series-v1-3-5-release-notes" description: "Leica RTC series firmware v1.3.1 release notes." tags: ["Laser Scanners", "Leica RTC", "Leica RTC Series"] updated: 2026-11-16T11:34:03Z published: 2026-11-16T11:34:03Z canonical: "rcdocs.leica-geosystems.com/leica-rtc-series-v1-3-5-release-notes" --- > ## Documentation Index > Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt > Use this file to discover all available pages before exploring further. # Firmware v1.3.5 | Leica RTC Series Date published: 16 November 2026 [![Leica RTC Series 3D laser scanners for fast, accurate reality capture.](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/leica-rtc-series-trio-scanner-header.jpg)](https://leica-geosystems.com/products/laser-scanners/scanners/leica-rtc-series) > ## **What’s new** **1. Increased Range Accuracy** Improvements to EDM signal processing increase the accuracy of range measurements. With firmware v1.3.5, a range accuracy specification of 1.0 mm + 10 ppm is achieved for all Leica RTC laser scanners. The updated range accuracy and corresponding 3D accuracy specifications are reflected in the latest product documentation. These updated specifications also apply to scanners delivered before the release of firmware v1.3.5, provided that the scanner is updated to firmware v1.3.5 or later. For the latest product documentation, please refer to [myWorld Customer Portal](https://myworld-portal.leica-geosystems.com/). **2. Improved Measurement Capacity on Non-Leica Tripods** With previous firmware versions, measurements on less stable, non-Leica tripods could occasionally fail, resulting in a “Scan failed” notification on the scanner display. Improvements to the scanner motor control increase measurement robustness on less stable tripod setups, allowing scanning and imaging to be completed reliably on non-Leica tripods. > ## **Bug Fixes** **1. Measurement Start Reliability** Resolved an issue where a measurement could occasionally fail if the Start button was pressed twice in quick succession. This firmware release includes various system optimisations to improve overall stability, reliability, and user experience. > ## Firmware Installation The new firmware v1.3.5 can be installed on any Leica RTC300, RTC500, or RTC700 laser scanner, independent of any previous firmware version. Compatibility with Leica Cyclone REGISTER 360 PLUS: – Cyclone REGISTER 360 PLUS v2026.1.1 or higher is required. Compatibility with Leica Cyclone FIELD 360: – Cyclone FIELD 360 v7.1.1 or higher is required. For optimal performance and compatibility, we recommend to always run the latest versions of the field and office software. ## Related - [Leica RTC Series | Laser scanner specifications](/leica-rtc-series-laser-scanners.md) - [Firmware v1.1.0 | Leica RTC Series](/leica-rtc-series-v1-1-0-release-notes.md) - [Firmware v1.2.0 | Leica RTC Series](/leica-rtc-series-v1-2-0-release-notes.md)