---
title: "Multiple Settings During Import"
slug: "cyclone-register-360-multiple-settings-during-import"
updated: 2026-09-07T11:31:55Z
published: 2026-09-07T11:31:55Z
canonical: "rcdocs.leica-geosystems.com/cyclone-register-360-multiple-settings-during-import"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Multiple Settings During Import

It is possible to have different settings for each Setup, Bundle, or Project in a single import session. By selecting an object in the Import area, the settings for that object will be displayed on the Properties panel.

If the object selected is, for example, a Project that has Setups with different settings under it, the check box will turn into a filled-in square. As shown below, all Setups have Auto B&W Target selected, but some have Import Images and Point Cloud Classification, and none of the Setups has Pre-Registered.

![image-20230206-220357.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20230206-220357.png)

![image-20230206-174842.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20230206-174842.png)