---
title: "Advanced Import Options"
slug: "cyclone-register-360-advanced-import-options"
updated: 2026-09-07T11:31:48Z
published: 2026-09-07T11:31:48Z
canonical: "rcdocs.leica-geosystems.com/cyclone-register-360-advanced-import-options"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Advanced Import Options

Cyclone REGISTER 360 PLUS adds Cloud-to-Cloud to all links during import and for all links created in the **Review and Optimize** area. The options below help the user by allowing or disallowing the use of Cloud-to-Cloud on selected Bundles. Of course, if the only constraint between two Setups is a Cloud-to-Cloud, the option to remove Cloud-to-Cloud is not allowed.

Several options for optimization are available under the context menu for a Bundle:

![advanced-import-options.PNG](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/advanced-import-options.PNG)

## **Optimize with Targets only**

The option allows a Bundle to be registered with targets only without Cloud-to-Cloud. After using this tool, the overall Bundle error will only show the target error as Cloud-to-Cloud is not used but shown anyway to show how the use of Cloud-to-Cloud affects the Bundle.

> [!NOTE]
> **Notes**
> 
> - This is exactly like disabling all Cloud-to-Cloud constraints in Cyclone REGISTER.
> - If even one link in the Bundle has a Cloud-to-Cloud link only (no targets), the overall Bundle error will average the Cloud-to-Cloud links with the target links.

## **Optimize with Cloud-to-Cloud**

This option will add Cloud-to-Cloud back to all links in the Bundle if the **Optimize with Targets Only** command was used previously.

## **Run Cloud-to-Cloud on All Links**

This command is run on a Bundle and can be found in the context menu of any Bundle. Running this command re-runs Cloud-to-Cloud on all existing links in the selected Bundle.

The use case for this tool is for re-running Cloud-to-Cloud on all links after removing trees, cars, and other noise from the point clouds using the fence delete tools from a Bundle in the Bundle view.

## **Optimization Error Help Dialog**

If optimization fails on a Bundle, Cyclone REGISTER 360 will now produce a list of links for investigation. The user can then inspect the links listed and either modify or remove them, saving time for the Bundle inspection process.

Workflow example:

- Run optimize on a Bundle by adding or removing links on a Bundle.
- If successful, no dialog will appear.
- If unsuccessful, the following dialog will appear:

![bundle-01.PNG](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/bundle-01.PNG)
- The dialog shows the link number and which Setups the link connects.
- The user can now inspect each of the links listed and either delete or modify them and retry optimization.