---
title: "Wall+Wall"
slug: "cyclone-3dr-wallwallucsc"
updated: 2026-09-07T11:51:19Z
published: 2026-09-07T11:51:19Z
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-wallwallucsc"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Wall+Wall

![CmdCwUCSWall_Wall.svg](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/CmdCwUCSWall-Wall.svg)

This command creates a new UCS with 2 clicks at the intersection of the two extracted planes (both on walls).

> [!TIP]
> ### Requirements
> 
> No selection is required to launch the command.

---

1. Click the first point on a wall using [Define points](/v1/docs/cyclone-3dr-enteringpointprocedure): a local plane is extracted on this wall.
2. Click the second point on another wall: a second plane is extracted on the wall.

> [!WARNING]
> ### Notes
> 
> 1. The origin of the created UCS is the projection of the first clicked point on the intersection line.
> 2. The Z-axis of the created UCS corresponds to the WCS Z-axis.