---
title: "Radial Sections"
slug: "cyclone-3dr-radialsectionc"
updated: 2026-09-07T11:51:46Z
published: 2026-09-07T11:51:46Z
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-radialsectionc"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Radial Sections

![CmdRadialSections.svg](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/CmdRadialSections.svg)

This command computes a set of planar sections around an axis. Set of sections are displayed as a single entity, but you can access to each individual section using the command [Ungroup Polyline](/v1/docs/cyclone-3dr-ungrouppolylinesc).

> [!TIP]
> ### Requirements
> 
> Select all the mesh(es) on which you want to calculate sections and launch the command.

1. Enter the [direction](/v1/docs/cyclone-3dr-definenormaldirection) of the radial section axis.
2. Enter the [origin](/v1/docs/cyclone-3dr-enteringpointprocedure) of this axis.
3. **Range**: choose where the sections are calculated:
  - **Regular:** with a regular step, for example one section each 45°
    - **All over:** all over the object. Check **Pass Through** to force the section to pass through a given point.
    - **Custom**: only between two angle values.
  - **List of values**: pick points or enter angle values to choose where to calculate sections.
4. You can also select the option **Compute parallels** to obtain quadrangular contours.

> [!NOTE]
> ### Technical information
> 
> Sections on an inspected mesh
> 
> If the sections are computed on the inspected mesh (considered as well as the reference or measure), the sections will keep the inspection values of the mesh. **It means that the hair diagram will not be, in most cases, in the plane of the section**. It depends on the type of inspection (2D or 3D).
> 
> Restriction: when a mesh was colored as the measure with a cloud as reference, this capability is not available.
> 
> Example of a hair diagram in 3D on a planar section:
> 
> ![SectionOnInspectedMesh_CADMesh.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/SectionOnInspectedMesh-CADMesh.png)
> 
> ***CAD and mesh used to compute the inspection***
> 
> ![SectionOnInspectedMesh_ColorMeasure.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/SectionOnInspectedMesh-ColorMeasure.png)
> 
> ***3D Inspection with colors applied on the 3D mesh***
> 
> ![SectionOnInspectedMesh_SectionPlaneY.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/SectionOnInspectedMesh-SectionPlaneY.png)
> 
> ***Section on the inspection mesh (Y plane)***
> 
> ![SectionOnInspectedMesh_HairDiagram.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/SectionOnInspectedMesh-HairDiagram.png)
> 
> ***Plane Y and hair diagram in 3D: direction of the deviation***
> 
> If you want to have a hair diagram on the plane of the section:
> 
> - Do an inspection in the direction of the plane and then do a section with this plane.
> - Do a section in the plane on both entities (reference and measure) and then do an inspection of this polyline/set of polylines.