---
title: "Limit Box"
slug: "cyclone-3dr-limitbox"
type: "index"
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-limitbox"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Limit Box

5 articles

## [Auto Limit Box](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-autolimitboxc.md)

Published on 2026-09-07

This command creates an automatic 3D limit box beyond which associated objects are not displayed. Requirements No selection is required to launch the command. Nevertheless, if objects are selected,...

## [Quick Limit Box](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-quicklimitboxc.md)

Published on 2026-09-07

This command is used to define a 3D limit box. Requirements No selection is required to launch the command. Click on a point using Define points to define the center of the limit box. A limit box with...

## [Create](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-3pointslimitboxc.md)

Published on 2026-09-07

This command is used to define a 3D limit box. Requirements No selection is required to launch the command. Click three points using Define points . Points n°1 and 2 will define the basis of the box....

## [Inflate](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-inflatelimitboxc.md)

Published on 2026-09-07

This command will inflate the active limit box. Requirements No selection is required to launch the command but you need one active box in your file.

## [Deflate](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-deflatelimitboxc.md)

Published on 2026-09-07

This command will deflate the active limit box. Requirements No selection is required to launch the command but you need one active box in your file.