---
title: "Hole"
slug: "cyclone-3dr-holerestrictionc"
updated: 2026-09-07T11:51:53Z
published: 2026-09-07T11:51:53Z
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-holerestrictionc"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Hole

![CmdCADHole.svg](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/CmdCADHole.svg)

This command is used to make holes in a face. The contour used in this command must be closed.

> [!TIP]
> ### Requirements
> 
> Select the surface or the contour(s) (closed geometries, closed CAD curves, closed CAD wires) and launch the command.

---

> [!TIP]
> ### Tips & Tricks
> 
> To have the best results in this command, try to avoid using self-intersecting contours.