---
title: "Guided Workflow | BIM Progress Monitoring and Tolerance Checking Introduction"
slug: "cyclone-3dr-guided-workflow-bim-progress-monitoring-and-tolerance-checking-intro"
updated: 2026-08-04T15:39:24Z
published: 2026-09-07T11:52:00Z
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-guided-workflow-bim-progress-monitoring-and-tolerance-checking-intro"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Guided Workflow | BIM Progress Monitoring and Tolerance Checking Introduction

[Tolerance Checking](/v1/docs/cyclone-3dr-tolerancechecking) and [Bim Progress Monitoring](/v1/docs/cyclone-3dr-bimprogressmonitoring) workflows give the same kind of analysis but their goals are different.

- Bim Progress Monitoring indicates whether a part is installed or not (it focuses on tracking the progress of construction against the project schedule).
- Tolerance checking indicates whether a part is installed in the correct position according to a given tolerance (it focuses on ensuring the accuracy and quality of construction).

Both cases can be confusing since matching a part and its measured points is mainly addressed thanks to their positions.

It is advisable to check manually the results during the second step of these workflows.