---
title: "Extrude"
slug: "cyclone-3dr-extrude"
type: "index"
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-extrude"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Extrude

3 articles

## [Linear Extrusion](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-extrudedmeshlinearc.md)

Published on 2026-09-07

This command creates 3D mesh(es) of profile(s) extruded along a direction, with a given length. Requirements Select one or several profiles or group of profiles (polyline, trajectory, CAD wire, CAD...

## [Profile along a Path](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-extrudedmeshprofileandpathc.md)

Published on 2026-09-07

This command creates a 3D mesh corresponding to a profile extrusion along a path. Requirements Select only a profile: it can be a planar polyline, a planar CAD wire, a planar CAD curve, or a linear...

## [Pipe / Tube along a Path](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-extrudedmeshpipec.md)

Published on 2026-09-07

This command creates 3D mesh(es) corresponding to a circle extrusion along path(s). Requirements Select one or more paths (polyline, set of polylines, trajectory, linear geometry, CAD wire, CAD curve,...