---
title: "Edit Image Set"
slug: "cyclone-3dr-editimagesetc"
updated: 2026-09-07T11:51:23Z
published: 2026-09-07T11:51:23Z
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-editimagesetc"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Edit Image Set

This command allows to display the content of a set of images. In the scene, the positions without images among the set of images are temporarily greyed out.

> [!TIP]
> ### Requirements
> 
> Double click a set of images from the treeview or use the contextual menu (Edit).

---

Filter the images by name or type: only the images visible in the top list can be modified in this command:

- Select any image from the list and click ![ExcractImage.jpg](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/ExcractImage.jpg) **Extract images** to take the selected image(s) or Position(s) out of the Set of Images. Use ![removeSelection.jpg](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/removeSelection.jpg) to remove the selected images from the list to extract (bottom list).
- Select any image from the list and click ![ImageDetails.jpg](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/ImageDetails.jpg) **Image details** to display the image, its mask and its properties.
- Use the **Texturing column** or **Check all/none** buttons to select which images will be used when texturing ([Smart Texture](/v1/docs/cyclone-3dr-smarttexturec), [Standard Texture](/v1/docs/cyclone-3dr-standardtexturec)).

---

> [!NOTE]
> ### Technical information
> 
> The goal of a set of images is to store many images grouped by position (that is to say per setup or per trajectory waypoint).