---
title: "Edit"
slug: "cyclone-3dr-edit"
type: "index"
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-edit"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Edit

6 articles

## [Edit Polyline](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-editpolylinec.md)

Published on 2026-09-07

This command allows to modify a polyline manually. Requirements Select one polyline and launch the command. You also can double click on a polyline or launch this command through the treeview if the...

## [Stretch Polyline](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-stretchpolylinec.md)

Published on 2026-09-07

This command stretches the selected polyline using control points with an interface similar to NURBS modification. Requirements Select the polyline to edit and optionally the mesh/surfacic geometry to...

## [Replace a Portion](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-replaceaportionc.md)

Published on 2026-09-07

This command replaces a portion of a polyline with a segment or a 3D curve. Requirements Select the polyline to process and optionally the mesh to project onto and launch the command. Define the...

## [Smooth Polyline](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-smoothpolylinec.md)

Published on 2026-09-07

This command smooths selected polyline(s). Requirements Select the polyline(s) to process and optionally the mesh to project onto and launch the command. Select the Smoothing type: The Hard smooth...

## [Cut Polyline](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-cutpolylinec.md)

Published on 2026-09-07

This command cuts the selected polylines a nd sets of polylines by clicking one or more points. Requirements No selection is required to launch the command. However some polylines have to be visible...

## [Resample Polyline](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-reducepolylinec.md)

Published on 2026-09-07

This command allows you to resample polylines by choosing the desired number of points. Requirements Select the polyline(s) to process and optionally the mesh to project onto and launch the command....