---
title: "Draw Sphere"
slug: "cyclone-3dr-drawspherec"
status: "update"
updated: 2026-09-09T08:44:18Z
published: 2026-09-09T08:44:18Z
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-drawspherec"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Draw Sphere

![CmdDrawSphere.svg](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/CmdDrawSphere.svg)

This command allows you to draw/create spheres with some constraints.

> [!TIP]
> ### Requirements
> 
> No selection is required to launch the command.

1. Click some [points](/v1/docs/cyclone-3dr-enteringpointprocedure) in the scene(at least 2 points are required), the best sphere of all input points is computed.
2. You can force parameters (**Center**, **Radius**) by clicking on the locks:

![Diagram illustrating key concepts with highlighted elements for better understanding.](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/unknown-macro.png)

> [!WARNING]
> ### Notes
> 
> The sphere created will be the one best fitting the points while keeping the values entered by the user.