---
title: "Draw"
slug: "cyclone-3dr-drawpolylinec"
updated: 2026-09-07T11:51:19Z
published: 2026-09-07T11:51:19Z
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-drawpolylinec"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Draw

![CmdPolylineDraw.svg](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/CmdPolylineDraw.svg)

This command constructs new polylines.

> [!TIP]
> ### Requirements
> 
> No selection is required to launch the command.

---

1. Select the method needed to create points in the 3D scene. If you need more information, refer to [Define points](/v1/docs/cyclone-3dr-enteringpointprocedure).
2. **Click points** to create the polyline.
3. If you want to delete the last point, press **Del** or **BackSpace** key.
4. If you want to exit the command without validating the current polyline, use the **ESC** key.
5. When you have finished the polyline, press **Enter** key. You can then start a new polyline.
6. If you have finished drawing polylines, press again **Enter** or **ESC** key to close the dialog box.

> [!TIP]
> ### Tip & Trick
> 
> - Close and validate the current polyline by pressing the **C** key.
> - Press the **CTRL** key to draw a segment which is vertical or horizontal to the current view.