---
title: "Draw"
slug: "cyclone-3dr-drawmeshc"
updated: 2026-09-07T11:51:19Z
published: 2026-09-07T11:51:19Z
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-drawmeshc"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Draw

![CmdMeshDraw.svg](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/CmdMeshDraw.svg)

This command creates new triangles.

> [!TIP]
> ### Requirements
> 
> No selection is required to launch the command.

1. **Click 3 points** to create a triangle (refer to [Define points](/v1/docs/cyclone-3dr-enteringpointprocedure)).
2. Press the **Del** or **BackSpace** key to delete the last point.
3. Press the **ESC** key to exit the command without accepting triangles.

> [!WARNING]
> ### Notes
> 
> - The triangles are automatically generated when the third point is clicked.
> - When validating:
>   - If there is a common edge between triangles a single mesh is created with these triangles.
>   - Otherwise, meshes containing one single triangle are created.