---
title: "From CAD Curves"
slug: "cyclone-3dr-cadwirefromcadcurvesc"
updated: 2026-09-07T11:51:46Z
published: 2026-09-07T11:51:46Z
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-cadwirefromcadcurvesc"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# From CAD Curves

![CmdCADWireFromCADCurves.svg](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/CmdCADWireFromCADCurves.svg)

This command creates a wire from connected curves. "Connected" means that each curve ends when the next curve starts and there is no gap between the two extremities.

> [!TIP]
> Select the CAD curves you want to merge. These curves must be connected; otherwise the wire will not be created.

> [!TIP]
> ### Tips & Tricks
> 
> When you have a wire, you can retrieve the original curves with the command [From CAD Wire](/v1/docs/cyclone-3dr-explodecadwirec).