---
title: "CAD Wire"
slug: "cyclone-3dr-cad-wire"
type: "index"
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-cad-wire"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# CAD Wire

3 articles

## [From Geometry](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-cadwirefromgeometryc.md)

Published on 2026-09-07

This command transforms the geometries (linear and surfacic) into wires: the linear geometries are transformed into CAD wires. the CAD wires are extracted from the surfacic geometries. Requirements...

## [From CAD Curves](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-cadwirefromcadcurvesc.md)

Published on 2026-09-07

This command creates a wire from connected curves. "Connected" means that each curve ends when the next curve starts and there is no gap between the two extremities. Select the CAD curves you want to...

## [From CAD Surface](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-cadwirefromcadsurfacec.md)

Published on 2026-09-07

This command extracts free borders from surfacic CAD Object(s) as CAD Wires. Requirements Select the surfacic CAD object(s) you want to extract wires from. Technical information Free borders can be...