---
title: "Guided Workflow | BIM Inspection"
slug: "cyclone-3dr-bim-inspection-touch-mode"
updated: 2026-08-06T08:11:02Z
published: 2026-09-07T11:52:00Z
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-bim-inspection-touch-mode"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Guided Workflow | BIM Inspection (Touch Mode)

## Introduction

In this exercise, you will learn how to do an inspection between a scan and a BIM model using the [Touch Mode](/v1/docs/cyclone-3dr-touch) interface.

For time-saving purpose, the BIM Inspection workflow relies on a specific file called Preparation file.

> [!NOTE]
> Learn more about the BIM Inspection workflow    
> 
> More infos here: [BIM Inspect](/v1/docs/cyclone-3dr-biminspect)

The exercise will first help you to make a correct preparation file then how to use this file for the inspection.

## Content

- [Guided Workflow | Create The Preparation File](/v1/docs/cyclone-3dr-create-the-preparation-file)
- [Guided Workflow | Inspect the Scanned Data with the BIM Object](/v1/docs/cyclone-3dr-exercise-biminspection)