Analysis

Prev Next
This command allows to modify the color, the scale and the threshold values of an inspection mapping. Note This command is used in several situations: To modify color map coming from the comparison of two objects, When an object contain...
This command allows you to change the color of a mesh or a cloud along a given direction. Changing the color along a direction may be useful, for example, in order to have a good idea of the depth of the object. Select all the meshes and/or clo...
This command allows you to analyze the levelness of a mesh or a point cloud. Requirements Select the mesh(es) or the cloud(s) and launch the command. Or launch this command without selection, to analyze planar parts of a cloud or a mesh. ...
This command allows you to inspect the flatness of a mesh or a point cloud. An inspection value will be associated to each point of the cloud or vertex according to the local flatness. Requirements Select the mesh(es) or the cloud(s) and laun...
This command allows you to inspect the slope of a mesh or a point cloud. An inspection value will be associated to each point of the cloud or vertex according to the angle between the local normal of the surface and the horizontal. Requirements...
  • 5 Articles
This workflow computes the Floor Flatness/Floor Levelness (FF/FL) values of a measured ground according to ASTM E1155. Requirements Select one cloud (either a native 3DR cloud or a LGSx) and optionally a limit box. Then launch the wor...
This command creates a gridded cloud with inspection information on points. Requirements Select a mesh containing inspection values and launch the command. Select the Grid orientation mode Default : the grid is projected on the...
This command detects the location of the minimum and maximum scalar attribute or inspection values of a cloud or a mesh. Moreover, it allows detecting iso gradient lines on an inspected mesh. Requirements Select one cloud with scalar attribut...
This command computes statistics based on the gradient information. Requirements Select the objects you want to get statistics for and launch the command. The chart intervals can be defined by two ways: Select Use current gradient...
  • 6 Articles
This workflow creates 3D sections of two clouds, two meshes or one mesh and one cloud, then compares them and computes volumes (two meshes are required for volume computation ). Requirements Select two clouds (or two meshes or one clou...
  • 4 Articles
This workflow creates sections of meshes (or clouds) along an axis. Requirements Select one or several meshes (or clouds) and a polyline (or a CAD curve or a trajectory or an alignment) and launch the workflow. Notes This workflow...
  • 5 Articles
This workflow creates 2D sections of two clouds, two meshes or one mesh and one cloud, then compares them. Requirements Select two clouds (or two meshes or one cloud and one mesh) with a polyline (or a CAD Curve or a trajectory or an alignm...
This command allows you to unroll the point cloud or the mesh of a tubular shape. Two types of results can be computed: 3D: to have a planar view of the shape keeping the relief on the surface, 2D: to create a color map in 2 dimensions. Thi...
This command unrolls polylines according to a curved axis. It is suitable to make longitudinal profiles of a curved way or a curved bridge for instance. Requirements Select the polyline(s) and/or the set(s) of polylines to unroll, then launc...
This command helps to unfold a cloud along a polyline. For instance, it is a helper function to generate one orthoimage for all frontages of a building. Requirements Select one cloud and one polyline, then launch the command. If the polyline...
This command detects clashes between surfacic objects and clouds and generates report data. Requirements Select meshes, surfacic features, CAD objects or BIM objects and clouds. Then launch the command. You can also reload a clash project b...
  • 3 Articles
BIM Progress Monitoring is a workflow which helps you to identify which parts of a construction site have been built or not by analyzing the coverage of a scan on a BIM model. Requirements Select at least one cloud, if possible clas...
  • 3 Articles
BIM Tolerance Checking is a workflow which helps you to detect which areas of a construction site have been built within or outside a specified tolerance. Requirements Select at least one cloud, if possible classified thanks to an indo...
This command creates or edits notes either to make a report or export a BCF. A note documents an identified defect (as-built vs model), it may contain: inspection measures, 3D views, photos from the camera device, description... Requirements ...
This command helps to create a report made of notes. Requirements No selection is required to launch the command. Click Add note button and click the aimed object. Fill the note information ( Title, Assignee, Description and ...
This command creates a report data object using selected measures. You can also open the Contextual Menu and choose Create Custom Chapter . Requirements Select some measures and launch the command. Notes A measure can only be in ...
This command creates a report data object using GeoTags. Then it is possible to customize and generate a report using the report editor . Requirements Select the GeoTags to process or launch the command without any selection to process al...