---
title: "Basic Tutorial | Alignment - Registration"
slug: "cyclone-3dr-alignment-registration"
type: "index"
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-alignment-registration"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Basic Tutorial | Alignment - Registration

2 sub categories | 1 article

## [Basic Tutorial | Move to a reference model](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-move-to-a-reference-model.md)

2 articles | Published on 2026-09-07

Each time you have to do a comparison or an inspection, you have to put your measures in the reference coordinate system. To do this, there are two methods: An alignment according to the shape to...

## [Basic Tutorial | Align clouds together](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-align-clouds-together.md)

1 article | Published on 2026-09-07

If you have not done so beforehand, in most cases you have to align all your scans in the same coordinate system based on the shape of the scanned object or based on particular points. It's the case,...

## [Basic Tutorial | Move to the Coordinate System (CS) of a 3D model](https://rcdocs.leica-geosystems.com/docs/cyclone-3dr-create-a-cs-related-to-a-3d-model.md)

Published on 2026-09-07

Even if the measure does not need to be placed in a reference coordinate system, you may have to change the current coordinate system in order to make it coherent with the object. For example, on a...