---
title: "Create"
slug: "cyclone-3dr-3pointslimitboxcwc"
updated: 2026-09-07T11:51:46Z
published: 2026-09-07T11:51:46Z
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-3pointslimitboxcwc"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Create

![Cmd3PtsClippingBox.svg](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/Cmd3PtsClippingBox.svg)

This command is used to define a 3D limit box.

> [!TIP]
> ### Requirements
> 
> No selection is required to launch the command.

1. Click three points using [Define points](/v1/docs/cyclone-3dr-enteringpointprocedure).
  1. Points n°1 and 2 will define the basis of the box. Note that the basis will be parallel to XoY plane from the current UCS.
  2. Point n°3 will set the height of the box.
2. A limit box is created and all previous ones are automatically deactivated.

> [!NOTE]
> ### Technical information
> 
> Other limit objects will be deactivated if the maximum number of activated limits is reached (refer to [Limit objects](/v1/docs/cyclone-3dr-clipping-plane)).