---
title: "2 Points"
slug: "cyclone-3dr-2pointsucsc"
updated: 2026-09-07T11:51:19Z
published: 2026-09-07T11:51:19Z
canonical: "rcdocs.leica-geosystems.com/cyclone-3dr-2pointsucsc"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# 2 Points

![CmdCwUC2Points.svg](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/CmdCwUC2Points.svg)

This command creates a new UCS and sets the orientation of the X-axis with 2 clicks.

> [!TIP]
> ### Requirements
> 
> No selection is required to launch the command.

---

1. Click the first point according [Define points](/v1/docs/cyclone-3dr-enteringpointprocedure): it will be the origin of the UCS.
2. Click the second point to define the orientation of the X-axis.

> [!WARNING]
> ### Notes
> 
> This will not change the orientation or direction of the Z-axis. The Z-axis will stay in the up direction.