---
title: "QuickSlice Wall"
slug: "cloudworx-quickslice-wall"
updated: 2026-09-07T16:05:49Z
published: 2026-09-07T16:05:49Z
canonical: "rcdocs.leica-geosystems.com/cloudworx-quickslice-wall"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# QuickSlice Wall

**AUTOCAD PRO** **REVIT** **bricscad pro** **ULTIMATE**

## **Line-Tools | QuickSlice Wall**

### **Command Line**

- **AutoCAD / BricsCAD: CWQSLICE | WALL**

This tool enables the creation of a horizontal slice from a single pick point. The resulting slice will have a UCS where the X-axis will be aligned along the wall to the right.

![image-20240425-143022.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20240425-143022.png)

---

### **Using the Tool**

To create a horizontal slice from a single pick point, follow the steps below:

1. Activate the tool using any option below:
  1. Select **QuickSliceWall** in the **Line-Tools** panel.
  2. Type a [command line prompt](/v1/docs/cloudworx-quickslice-wall#command-line) specific to the preferred CAD system and press **ENTER**.
2. When prompted to **Pick wall point**, select a point on the point cloud to define the wall.
3. The pick point will become the origin of the new UCS and the Workplane will also be positioned there.

The QuickSlice is created and saved to the [Clipping Manager](/v1/docs/cloudworx-clipping-manager). However, if the QuickSlice tool is used again, it will overwrite this clip. To save the clip for future use, rename it in the Clipping Manager.