---
title: "QuickSlice Floor+Wall"
slug: "cloudworx-quickslice-floor-wall"
updated: 2026-09-07T16:03:59Z
published: 2026-09-07T16:03:59Z
canonical: "rcdocs.leica-geosystems.com/cloudworx-quickslice-floor-wall"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# QuickSlice Floor+Wall

**AUTOCAD PRO** **REVIT** **bricscad pro** **ULTIMATE**

## **Line-Tools | QuickSlice Floor+Wall**

### **Command Line**

- **AutoCAD / BricsCAD: CWQSLICE | F**

This tool allows creating a vertical slice with the UCS where the X-axis is on the floor, the origin is on the hinge line, and the Z-axis is along the hinge.

![image-20240425-082951.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20240425-082951.png)

---

### **Using the Tool**

To create a vertical slice based on two points selected on a floor and a wall, follow the steps below:

1. Activate the tool using any option below:
  1. Select **QuickSliceFloor+Wall** in the **Line-Tools** panel.
  2. Type a [command line prompt](/v1/docs/cloudworx-quickslice-floor-wall#command-line) specific to the preferred CAD system and press **ENTER**.
2. When prompted to **Pick floor point**, select a point on the point cloud to define the floor.
3. When prompted to **Pick wall point**, select a point on the point cloud to define the wall.

The QuickSlice is created and saved to the [Clipping Manager](/v1/docs/cloudworx-clipping-manager). However, if the QuickSlice tool is used again, it will overwrite this clip. To save the clip for future use, rename it in the Clipping Manager.