---
title: "Point Density"
slug: "cloudworx-point-density"
updated: 2026-09-07T17:18:22Z
published: 2026-09-07T17:18:22Z
canonical: "rcdocs.leica-geosystems.com/cloudworx-point-density"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Point Density

**AUTOCAD PRO** **revit** **navisworks** **bricscad pro** **ULTIMATE**

## **Rendering | Point Density**

### **Command Line**

- **AutoCAD / BricsCAD: CWPOINTSPACING**

This command allows to trade off resolution against point loading and rendering speed. Better resolution (point density) requires more time to load and render the points. When point density is off, it uses the full detail required by the viewport.

![image-20240319-123548.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20240319-123548.png)

---

### **Using the Tool**

To change the point density level, use either a corresponding button in the **Rendering** panel (see the figure above) or the corresponding [command line prompt](/v1/docs/cloudworx-point-density#command-line).

The point density levels are as follows:

- **Point Density Level 1** - the image is displayed with a high point density (**CWPOINTSPACING | 1**).
- **Point Density Level 2** - the image is displayed with a medium point density (**CWPOINTSPACING | 2**).
- **Point Density Level 3** - the image is displayed with a low point density (**CWPOINTSPACING | 3**).
- **Point Density Level 4** - the image is displayed with the lowest point density (**CWPOINTSPACING | 4**)
- **Point Density Off** - the point density control is turned off (**CWPOINTSPACING | Off**).