---
title: "Floor + Wall"
slug: "cloudworx-floor-wall"
updated: 2026-09-07T18:27:18Z
published: 2026-09-07T18:27:18Z
canonical: "rcdocs.leica-geosystems.com/cloudworx-floor-wall"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Floor + Wall

**AUTOCAD BASIC** **AUTOCAD PRO** **bricscad basic** **bricscad pro** **ULTIMATE**

## **Orientation | Workplane | Floor + Wall**

### **Command Line**

- **AutoCAD / BricsCAD: CWWORKPLANE | FLOOR+WALL**

This command creates a UCS based on a floor and a wall without changing the Z-axis. The Workplane is then set to the wall.

![image-20230908-144816.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20230908-144816.png)

---

### **Using the Tool**

> [!NOTE]
> **Note:** Before using the tool, ensure the **Snap to Node** setting is enabled by typing **OSNAP** at the CAD command line.

To create a UCS based on points selected on a floor and a wall, follow the steps below:

1. Activate the tool using any option below:
  1. Select **Floor +Wall** from the **Workplane** menu in the **Orientation** panel.
  2. Type a [command line prompt](/v1/docs/cloudworx-floor-wall#command-line) specific to the preferred CAD system and press **ENTER**.
2. When prompted to **Pick floor point**, select a point on the point cloud to define the floor.
3. When prompted to **Pick wall point**, select a point on the point cloud to define the wall.

The UCS will now be aligned to the intersection of the floor and wall that were defined.