---
title: "Floor Plan"
slug: "cloudworx-floor-plan"
updated: 2026-09-07T16:57:34Z
published: 2026-09-07T16:57:34Z
canonical: "rcdocs.leica-geosystems.com/cloudworx-floor-plan"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Floor Plan

**AUTOCAD PRO** **REVIT** **bricscad pro** **ULTIMATE**

## **Line-Tools | Polyline Tools | Floor Plan**

The Floor Plan tool speeds up the process of creating 2D floor plans.

![image-20240322-152317.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20240322-152317.png)

---

### **Using the Tool**

To use the Floor Plan tool, follow the steps below:

1. Create a quick slice (refer to the [QuickSlice](/v1/docs/cloudworx-quickslice) page for more details).
2. Click the **Floor Plan** button in the **Line-Tools** panel to launch the tool.
  1. The **Floor Plan** dialog appears. ![floor plan 1.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/floor%20plan%201.png)
3. Create polylines of a floor plan:

The suggested results will be displayed as red lines. They can be chosen and deleted to eliminate any incorrect results as necessary.

![floor plan find walls.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/floor%20plan%20find%20walls.png)
  1. Either click **Import QuickPlan** in the **Process** panel to import a QuickPlan DXF file created in Cyclone FIELD 360. It will serve as a starting point for creating a floor plan and overlaying its segments with preliminary alignment conducted in the field. The button will be activated only if the project contains a DFX file with a QuickPlan.
  2. If no QuickPlan is available, click **Find Walls** in the **Process** panel to automatically identify possible line segments.
4. Click **Construct Polyline** in the **Process** panel to connect line segments and fill in the gaps when creating polylines.
  1. Click on RED line segments to connect them. They will become YELLOW.
  2. When a gap is reached, click on a wall to automatically fit a line to the point cloud. Clicking and dragging an area of points will also try to create a best-fit segment along the drawn line. Clicking and dragging an area with no points will manually create a line as drawn. Connected and drawn segments will try to grow automatically (if the **Auto Advance** option in the **Fit Polyline** panel is enabled) and will also refine as new segments are connected/created.
  3. After ending or closinga polyline, it turns GREEN. Green polylines may be selected, and their endpoints can be adjusted to fine-tune the linework or to correct errors.
  4. When working with complex projects, use the **Fit Polyline** or **Fit Arc** tools in the **Tools** panel independently to fit specific polylines, segments, or arcs.

![floor plan construct polyline.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/floor%20plan%20construct%20polyline.png)
5. Click **Send to CAD** in the **Process** panel to send the finished polylines (shown as GREEN lines) back to the current drawing/model and close the tool. Any remaining RED line segments will be discarded and ignored.