---
title: "Fit Wall"
slug: "cloudworx-fit-wall"
updated: 2026-09-07T08:34:55Z
published: 2026-09-07T08:34:55Z
canonical: "rcdocs.leica-geosystems.com/cloudworx-fit-wall"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Fit Wall

**revit**

## **Fitters | Wall**

The Wall fitter allows creating walls in 3D in a semi-automated fashion to speed up the modelling process. This fitter supports vertical or slanted walls of varying thicknesses.

![image-20240731-091821.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20240731-091821.png)

---

## **Using the Tool**

To fit a wall, follow the steps below:

1. Click the **Wall** icon in the **Fitters** panel.
  1. The **Fit Wall** dialog will appear. ![image-20240731-092517.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20240731-092517.png)
2. In the **Fit Wall** dialog:
  1. In the **Maximum RMS Error** field, specify a maximum allowable error for the fit.
  2. In the **Select PickType** field, select a desired PickType.
  3. In the **Select Level** field, select a level to set as the lower plane for fitting the wall. Levels are set within a Revit drawing prior to inserting modelled objects. Please refer to Revit help for instructions on setting levels.
  4. In the **Top constraint** field, select a top constraint to define the upper plane for fitting the wall.
  5. In the **Wall Height** field, specify the height of a wall.
  6. In the **Base Offset** field, specify the base offset.
  7. In the **Location line** field, select alocation line that corresponds to the precise point on the scanned wall to which the wall should be matched.
  8. In the **Wall front face visible** field, specify whether the wall's visible side faces the outside or the inside of the structure.
  9. If you believe that the wall you are fitting to is slanted (a wall is considered slanted if it exceeds a 5-degree tilt between two levels), select the **Allow slanted wall** check box.
  10. Click **OK**.
3. Pick a point on the point cloud to grow a wall.