Clipping

Prev Next

While working with a point cloud, it can be helpful to limit the view of the point cloud to a specific portion by hiding points that are not required. It can be achieved using a limit box, slice, section view, or fence to define which points are displayed or hidden.

Note: Hidden points are not deleted from the point cloud and can be displayed again at any time. Because many CloudWorx tools operate only on visible points, clippings can be used to limit tool operations to a specific area of the point cloud.

The Clipping Manager dialog can be used to toggle or delete defined clippings in CloudWorx.

Limit Box

A limit box is a 3D rectangular box beyond which points are not displayed or processed.

Section View

A section view allows defining a 3D plane and then hiding the points on one side of that plane for an exposed cross-section view of the point cloud.

Slice

A slice defines two parallel 3D planes and then hides the points outside the zone between the two planes, resulting in a controlled cross-section view of the point cloud.

Fence

The fence commands allow hiding points within a user-defined fence. A fence can be in the shape of a circle, rectangle, or polygon.

Further reading on Clipping: