---
title: "2Point Polyline"
slug: "cloudworx-2point-polyline"
updated: 2026-09-07T16:56:23Z
published: 2026-09-07T16:56:23Z
canonical: "rcdocs.leica-geosystems.com/cloudworx-2point-polyline"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://rcdocs.leica-geosystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# 2Point Polyline

**AUTOCAD PRO** **REVIT** **bricscad pro** **ULTIMATE**

## **Line-Tools | Polyline Tools |2Point Polyline**

### **Command Line**

- **AutoCAD / BricsCAD: CWBPLINE**

This tool is used to create an auto-fit polyline using 2-point segments.

The 2Point Polyline tool can be very helpful when working with point cloud data that is not very clean, contains irregularities, such as windows or doors, or needs more user control. By allowing the user to control the creation of each segment through specifying two points, it provides better control over the final result.

![image-20240528-083607.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20240528-083607.png)

---

### **Using the Tool**

To create a 2D polyline with the 2Point Polyline tool, follow the steps below:

1. Create a quick slice (refer to the [QuickSlice](/v1/docs/cloudworx-quickslice) page for more details).
2. Click **2Point Polyline** in the **Line-Tools** panel or type a [command line prompt](/v1/docs/cloudworx-2point-polyline#command-line) specific to the preferred CAD system and press **ENTER**.
3. Click 2 pick points on each polyline segment.
4. To create arc polyline segments, type **A** (**A**rc) in the CAD command line.

> [!NOTE]
> **Note:** The pick points do not need to be at the ends of segments. CloudWorx will join the created segments automatically based on the user's indicated direction.

![image-20240528-094520.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20240528-094520.png)
5. To undo the created segment, use the **CWGPLINE** | **U** (**U**ndo) command or press **Ctrl+Z**.

The auto-fit polyline is created and follows the outline of the object in a quick slice.

![image-20240528-094623.png](https://cdn.document360.io/820e11db-8ed5-45ae-ac86-f6b77dcb2aa7/Images/Documentation/image-20240528-094623.png)