This command computes the best symmetry plane from the input object.
Requirements
Select the object (mesh or cloud) on which you want to compute a best symmetry plane and an initial plane. Then, launch the command.
Optionally, define some constraints for the best symmetry plane.
-
If you do not define any constraints, the input plane is used as an initialization for the output plane calculation.
-
If you define constraints, you can choose to:
-
constraint the center of the input plane so that it does not move: the output plane will pass through this point
-
keep the orientation of the plane X axis (refer to the reference frame displayed on the input plane to see which axis will be kept). This option is interesting, for example, if a vertical plane is requested.
-
keep the orientation of the plane Y axis (same as the Y axis but with a perpendicular axis)
-
disable rotations: the output plane will be parallel to the input plane
-
Notes
The input plane must be close to the output expected symmetry plane.